Updates 2014/06/29
- Bibi
- Posts: 6
- Joined: Sat 4. Jan 2014, 23:30
- Gender: Female
- TOC-MOUL Name: MysBibi
- TOC-MOUL KI#: 175031
- TOC-TPOTS Name: Bibi
- TOC-TPOTS KI#: 58552
- MOULa Name: Bibi
- MOULa KI#: 85916
- Gehn Shard Name: MysBibi
- Gehn Shard KI#: 40463
Re: Updates 2014/06/29
I am getting an error. "patcher fails to launch" I tried running as admin. Also last night I did a reinstall and that got me in but error message is back when I tried again. Any ideas anyone? Thanks!
- Zesty of Xeniphers
- Posts: 98
- Joined: Fri 5. Jul 2013, 18:59
- TOC-MOUL Name: Zesty of Xeniphers
- TOC-MOUL KI#: 250135
- MOULa Name: Zesty of Xeniphers
- MOULa KI#: 20053
- DI Name: Zesty of Xeniphers
- DI KI#: 218448
Re: Updates 2014/06/29
ABSOLUTELY AGREE !!! congrats Mystler !!!!!!!!!!!!!!!!!!!!!!!!! the new messenger pub is beyond expectations too. a job of a true professional !!!Nicole wrote:With all that TOC has to offer, I personally like it more than Moula now.
Wonderful place to visit. Lots to do. New things, better things.
Thanks for a wonderful playground.
-Nicoleleigh-
P.S. only one small thing, not sure if you are still working on it but in DERENO we couldn't use a 3rd person view. i tired and it brings me back inside the pod and how about accessing the water under the ice area ? is that possible to be made solid too ?
and another question: what happened to the city plazza tent ? we really miss it

Re: Updates 2014/06/29
I did notice that the pod(s) power on/off switches work but only for a few seconds..then they are off again... anyone else or just me?
-
Abjab
- Posts: 46
- Joined: Tue 9. Aug 2011, 06:29
- TOC-MOUL Name: Abjab
- TOC-MOUL KI#: 2976
- MOULa Name: Abjab4
- Location: Seattle, USA
Re: Updates 2014/06/29
Charura said...
It's another MOUL discovery thing..
As best I recollect:- In short, Charura, you ran your batteries down, just like we all do ... 
Tetsonot may be an exception (It's underwater):-
Hope this helps.... 
Yes, Charura, we all do it ! You are in good companyI did notice that the pod(s) power on/off switches work but only for a few seconds..then they are off again... anyone else or just me?
As best I recollect:-
Spoiler:
Tetsonot may be an exception (It's underwater):-
Spoiler:
Hi All ! Myst'ya !! Abjab KI#2976, DRC(1); Abjab2 KI#4051, DRC(2)/Janaba's Hood; Flat Stanley KI#222539, DRC(27)/D-E Hood
- Doobes
- Posts: 6
- Joined: Mon 16. Jun 2014, 22:07
- Gender: Male
- TOC-MOUL Name: Doobes
- TOC-MOUL KI#: 82340
- MOULa Name: Doobes
- MOULa KI#: 6302
- DI Name: Doobes
- DI KI#: 44387
- Gehn Shard Name: Doobes
- Gehn Shard KI#: 14291
- Minkata Name: Doobes
- Minkata KI#: 35287
Re: Updates 2014/06/29
Hey everyone! Just wanted to say once again: great job to the TOC guys for this update! And also a big thank you to them for letting me share the new Pub with all of you. I'm glad you're enjoying it so far!
Thanks to the feedback from those on Gehn Shard, many of the problems found are already fixed for a future update (including the conference room one mentioned previously here...at least I hope!), but I'm always looking to improve things, so if you notice any bugs or have some suggestions, post them here as I'd love to hear them!
We're also still accepting adverts to go on the two bulletin boards behind the stairs, so if you'd like to advertise your group or Guild, be sure to e-mail us your advert at guild@guildofmessengers.com. There is no size restrictions, but the higher resolution, the better it'll look when we add it in the next update.
Have fun!
Thanks to the feedback from those on Gehn Shard, many of the problems found are already fixed for a future update (including the conference room one mentioned previously here...at least I hope!), but I'm always looking to improve things, so if you notice any bugs or have some suggestions, post them here as I'd love to hear them!
We're also still accepting adverts to go on the two bulletin boards behind the stairs, so if you'd like to advertise your group or Guild, be sure to e-mail us your advert at guild@guildofmessengers.com. There is no size restrictions, but the higher resolution, the better it'll look when we add it in the next update.
Have fun!
KI #s: MOULa - 45311, Minkata - 35287, Gehn - 14291,
TOC - 82340, DI - 44387

My posts are not associated with the GoMe in any way unless otherwise stated.
TOC - 82340, DI - 44387

My posts are not associated with the GoMe in any way unless otherwise stated.
Re: Updates 2014/06/29
Abjab said...

Never could see that and thank you for the battery info...I'll remember to turn them off next time before I leave the podTetsonot may be an exception (It's underwater)
Re: Updates 2014/06/29
Hi Doobes,Doobes wrote:Hey everyone! Just wanted to say once again: great job to the TOC guys for this update! And also a big thank you to them for letting me share the new Pub with all of you. I'm glad you're enjoying it so far!
Thanks to the feedback from those on Gehn Shard, many of the problems found are already fixed for a future update (including the conference room one mentioned previously here...at least I hope!), but I'm always looking to improve things, so if you notice any bugs or have some suggestions, post them here as I'd love to hear them!
We're also still accepting adverts to go on the two bulletin boards behind the stairs, so if you'd like to advertise your group or Guild, be sure to e-mail us your advert at guild@guildofmessengers.com. There is no size restrictions, but the higher resolution, the better it'll look when we add it in the next update.
Have fun!
It's a great pub, I did notice various benches around the the edges, I want to ask, are they meant to be able to be sat on? because nearly everywhere I tried had no indication I could sit on them. I know this is a tiny minor thing compared to all the effort you put in, and I thank you for it.
Alien
- Korovev
- Posts: 32
- Joined: Sun 20. Apr 2014, 19:17
- TOC-MOUL KI#: 236871
- TOC-TPOTS KI#: 55350
- MOULa KI#: 46116
- DI KI#: 194197
- Gehn Shard KI#: 137074
- Minkata KI#: 132812
- Contact:
Re: Updates 2014/06/29
A couple of notes:
Wineskin users need the usual trick of manually copying the Visual C++ 2013 DLLs (msvcp120.dll and msvcr120.dll, along with the the 110 versions) in the TOC folder or in the windows/system32 folder, inside the wrapper. Perhaps this trick also works for XP users?
In Negilahn and Payiferen the camera updates correctly if you simply “/x 50” in front of the big window by the middle floor (you don’t really need to “/float”). In Dereno I couldn’t find a camera spot fix. As for Tetsonot... well, it’s a deepwater pod that’s barely holding together, would you really want to go outside?
Wineskin users need the usual trick of manually copying the Visual C++ 2013 DLLs (msvcp120.dll and msvcr120.dll, along with the the 110 versions) in the TOC folder or in the windows/system32 folder, inside the wrapper. Perhaps this trick also works for XP users?
In Negilahn and Payiferen the camera updates correctly if you simply “/x 50” in front of the big window by the middle floor (you don’t really need to “/float”). In Dereno I couldn’t find a camera spot fix. As for Tetsonot... well, it’s a deepwater pod that’s barely holding together, would you really want to go outside?
- Doobes
- Posts: 6
- Joined: Mon 16. Jun 2014, 22:07
- Gender: Male
- TOC-MOUL Name: Doobes
- TOC-MOUL KI#: 82340
- MOULa Name: Doobes
- MOULa KI#: 6302
- DI Name: Doobes
- DI KI#: 44387
- Gehn Shard Name: Doobes
- Gehn Shard KI#: 14291
- Minkata Name: Doobes
- Minkata KI#: 35287
Re: Updates 2014/06/29
They should all have working sitting mods. At last count there were nearly 70 places to sit too! Believe me, they were tested to death by myself and the GoW crew.Alien wrote:Hi Doobes,
It's a great pub, I did notice various benches around the the edges, I want to ask, are they meant to be able to be sat on? because nearly everywhere I tried had no indication I could sit on them. I know this is a tiny minor thing compared to all the effort you put in, and I thank you for it.
Alien
Not sure why they wouldn't be working, although we did notice lag sometimes kept the hotspot from popping up. /shrug
If all else fails, the Ctrl + 7 method while standing on them also works in a pinch.
KI #s: MOULa - 45311, Minkata - 35287, Gehn - 14291,
TOC - 82340, DI - 44387

My posts are not associated with the GoMe in any way unless otherwise stated.
TOC - 82340, DI - 44387

My posts are not associated with the GoMe in any way unless otherwise stated.
- calroger
- Posts: 321
- Joined: Wed 25. Apr 2012, 23:56
- Gender: Male
- TOC-MOUL Name: Akon
- TOC-MOUL KI#: 208406
- MOULa Name: Retiredman
- MOULa KI#: 16603428
- Gehn Shard Name: Retiredman
- Gehn Shard KI#: 124834
- Location: Beaverton, Oregon, USA
Re: Updates 2014/06/29
I am running Windows 7 on an HP Pavilion P6347C and I have been able to sit in every place I tried. I tried all the benches along the walls on upper level, chairs in conference room, benches in conference room foyer, several different tables on lower level and several bar stools. Everything appears to be working properly for me.
Cal (Akon in game)
Cal (Akon in game)
Cal (Akon in game)
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11