I have been wandering all around the cave and can't find the Guild of Messengers pub. Can you provide a hint.
Thanks.
Cal
Updates 2014/06/29
- calroger
- Posts: 321
- Joined: Wed 25. Apr 2012, 23:56
- Gender: Male
- TOC-MOUL Name: Akon
- TOC-MOUL KI#: 208406
- MOULa Name: Retiredman
- MOULa KI#: 16603428
- Gehn Shard Name: Retiredman
- Gehn Shard KI#: 124834
- Location: Beaverton, Oregon, USA
Re: Updates 2014/06/29
Cal (Akon in game)
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
-
Abjab
- Posts: 46
- Joined: Tue 9. Aug 2011, 06:29
- TOC-MOUL Name: Abjab
- TOC-MOUL KI#: 2976
- MOULa Name: Abjab4
- Location: Seattle, USA
Re: Updates 2014/06/29
Doobe's GOMe Pub is Exquisite !!!...Thank you all Very Much !!
The new free-range (Solid exterior ground) Negilahn Pod works perfectly for me (as Minion Dave, Male Avatar), and I like the hole in the middle of the 'pond',
@ Acorn et al....Edit: Clarification/Info...
Cigale had some problems falling thru Pod exteriors, until she made admin rights to allow download changes, I think. That fixed things, she said.
@Calrogers.....Each Guild Pub is accessible by selecting the appropriate Guild Shirt in Kirel....I think you are only given one Guild Pub link at a time in TOC MOUL...each Kirel Guild table has a note on it which names that Guild...once selected and worn, your Nexus will add the GOMe Pub link under City list..... until you later select some other Guild's Shirt.
Hope this helps......
The new free-range (Solid exterior ground) Negilahn Pod works perfectly for me (as Minion Dave, Male Avatar), and I like the hole in the middle of the 'pond',
Spoiler:
Spoiler:
@Calrogers.....Each Guild Pub is accessible by selecting the appropriate Guild Shirt in Kirel....I think you are only given one Guild Pub link at a time in TOC MOUL...each Kirel Guild table has a note on it which names that Guild...once selected and worn, your Nexus will add the GOMe Pub link under City list..... until you later select some other Guild's Shirt.
Hope this helps......
Last edited by Abjab on Tue 1. Jul 2014, 12:01, edited 2 times in total.
Hi All ! Myst'ya !! Abjab KI#2976, DRC(1); Abjab2 KI#4051, DRC(2)/Janaba's Hood; Flat Stanley KI#222539, DRC(27)/D-E Hood
- calroger
- Posts: 321
- Joined: Wed 25. Apr 2012, 23:56
- Gender: Male
- TOC-MOUL Name: Akon
- TOC-MOUL KI#: 208406
- MOULa Name: Retiredman
- MOULa KI#: 16603428
- Gehn Shard Name: Retiredman
- Gehn Shard KI#: 124834
- Location: Beaverton, Oregon, USA
Re: Updates 2014/06/29
Thanks. I'll give it a go.
Cal
Cal
Cal (Akon in game)
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
- calroger
- Posts: 321
- Joined: Wed 25. Apr 2012, 23:56
- Gender: Male
- TOC-MOUL Name: Akon
- TOC-MOUL KI#: 208406
- MOULa Name: Retiredman
- MOULa KI#: 16603428
- Gehn Shard Name: Retiredman
- Gehn Shard KI#: 124834
- Location: Beaverton, Oregon, USA
Re: Updates 2014/06/29
All I can say is...WOW! Now to explore the pods again.
Cal
Cal
Cal (Akon in game)
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
- Mystler
- Development Manager
- Posts: 651
- Joined: Mon 11. Jul 2011, 16:14
- Gender: Male
- TOC-MOUL Name: Mystler
- TOC-MOUL KI#: 346
- MOULa Name: Mystler
- MOULa KI#: 150272
- Location: Germany
- Contact:
Re: Updates 2014/06/29
Whenever you have sent a message in the chat and start typing a new one, you can press the up key to repeat the last thing you said. Unfortunately, this is not working for slash commands yet, but I have already written a fix for that.janaba wrote:I couldn't figure out how the other chat text feature should work, I mean, I'll quote 'Repeat recent chat lines with up/down keys'
As soon as that fix is live, you can also repeat commands. E.g. if you use a huge OfflineKI command and mistyped something, enter the chat input line, press up and you don't have to write it all again.
- Nicole
- Posts: 66
- Joined: Sun 21. Aug 2011, 19:06
- MOULa Name: Nicoleleigh
- Location: Cordova, Tennessee
Re: Updates 2014/06/29
Cal, you might need to get that Messenger t-shirt on to get into the pub.
Something you must see. Amazing.
Something you must see. Amazing.
The world is my stage.
-
Acorn
- Posts: 13
- Joined: Sat 30. Nov 2013, 23:45
- TOC-MOUL Name: Acorn
- MOULa Name: Acorn1
- Gehn Shard Name: Acorn
- Minkata Name: Treehugger
Re: Updates 2014/06/29
For those of us not fortunate enough to bump into Myxa, can someone please explain how to get out of the pods and explore?janaba wrote:The fun began when I met Myxa, who explained to me how 'to enter' and roam the Negilahn exteriors and then invited me to her Dereno to explore the exterior regions together, then also Charura joined us and we had lots of fun using the float and coordinate xyz and rot (rotation) commands
He very much liked the new Pub - he and I managed to get stuck in the conference room chair, just as I had done in the Gehn version, so I can confirm that this bug still needs to be fixed. But Doobes has been alerted to this already
Re: Updates 2014/06/29
Thank you, Mystler, I just tried it out and it works flawlessly, and it works as often as you like subsequently ...Mystler wrote:Whenever you have sent a message in the chat and start typing a new one, you can press the up key to repeat the last thing you said. Unfortunately, this is not working for slash commands yet, but I have already written a fix for that.janaba wrote:I couldn't figure out how the other chat text feature should work, I mean, I'll quote 'Repeat recent chat lines with up/down keys'
As soon as that fix is live, you can also repeat commands. E.g. if you use a huge OfflineKI command and mistyped something, enter the chat input line, press up and you don't have to write it all again.
As for the commands, esp. the huge and difficult ones with coordinates etc. on TOC for example I can see this as useful as you've said, but for chat I couldn't see resp. remember where this might be useful ... So, I just looked for Adam's answer on the GoW forum with a very nice and useful exemplary incident, which might happen even oftentimes for some, esp. on parties or meetings like the AGM etc. for me and for all else interested, please have a look here, and I'll quote that directly here too
Christian Walther wrote:Can someone explain the use of this feature to me? Under what circumstances would I want to say something again on chat that I have already said a few lines earlier? I can see how an input history is useful on a shell command line, but why for chat?
Acorn, Myxa taught us, Charura and me, how to use the /float command and add to this the /x or y or z [space] plus +/-20, 30, 50, 90 ... etc. (e.g. standing in front of a window, then /float 'enter' and then /y 20 or /x -50 etc. 'enter', like this) or you can use /rot [space]-/+90 or 180 etc. for rotation in the exteriors ... I just found Alien's (and Scarchu's) KI commands on the GoSleeper's forums for not so basic commands on TOC, please, have a look here ...Tsar Hoikas wrote:I know I said this in IRC, but here is it for posterity. You just typed a really nice/thoughtful/witty message and meant to send it to the whole age.... Except you had a player selected by mistake in the silly player lists. Now there's no need to retype the whole thing--just clear that selection, press the up arrow, and press enter.
Besides that I wonder if there'd be other ways implemented to roam those exteriors of the Pods ... When I read Abjab's post it sounds as if he was able 'to walk' on solid ground, even 50 feet down, while with the float and coordinates commands you cannot move freely, just move resp. actually float 'by using the commands', which might become a bit tedious, even if you get used to it with a little practice ... Ok, looking forward to that answer, thanks ...
-
Acorn
- Posts: 13
- Joined: Sat 30. Nov 2013, 23:45
- TOC-MOUL Name: Acorn
- MOULa Name: Acorn1
- Gehn Shard Name: Acorn
- Minkata Name: Treehugger
Re: Updates 2014/06/29
Thanks, janaba, I'll give it a try 
- calroger
- Posts: 321
- Joined: Wed 25. Apr 2012, 23:56
- Gender: Male
- TOC-MOUL Name: Akon
- TOC-MOUL KI#: 208406
- MOULa Name: Retiredman
- MOULa KI#: 16603428
- Gehn Shard Name: Retiredman
- Gehn Shard KI#: 124834
- Location: Beaverton, Oregon, USA
Re: Updates 2014/06/29
/anim ladderup works also from inside one of the windows.
Cal
Cal
Cal (Akon in game)
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11
---------
HP Pavilion P6347C, AMD Athlon II X4 630 processor, 2.80 ghz
nVidia GeForce GT640 Graphic card
6 gb RAM
1.2 tb (1200 gb) on three drives
Windows 10 Home Edition
Directx V.11