Here is mine, if you want more just ask.
Time of this report: 9/3/2011, 16:19:22
Machine name: BIG-FROGS1
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: INTELR
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz (2 CPUs)
Memory: 1536MB RAM
Page File: 567MB used, 2867MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
and
---------------
Display Devices
---------------
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_A4013842&REV_A1
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Default Monitor
Monitor Max Res:
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.8026 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/3/2011 06:49:00, 4210816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 8/3/2011 06:49:00, 12542592 bytes
Device Identifier: {D7B71E3E-4161-11CF-A844-0D8400C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0xA4013842
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Edit; It also has hyper threading, which is enabled.
[FIXED]Gahreesen control room and deadly Bahro caves
- FredTCat
- Posts: 60
- Joined: Sun 14. Aug 2011, 17:02
- TOC-MOUL Name: Fred T Cat
- TOC-MOUL KI#: 8468
- TOC-TPOTS Name: Fred T Cat
- TOC-TPOTS KI#: 31874
- MOULa Name: David Blue
- MOULa KI#: 13439238
- Location: Panama City, Fla.
Re: Gahreesen control room and deadly Bahro caves
Life is hard
then you come back
as a cat.
then you come back
as a cat.
Re: Gahreesen control room and deadly Bahro caves
I'm having the same problem with the Gahreesen control room. It won't let me get through...I keep bouncing back.
- FredTCat
- Posts: 60
- Joined: Sun 14. Aug 2011, 17:02
- TOC-MOUL Name: Fred T Cat
- TOC-MOUL KI#: 8468
- TOC-TPOTS Name: Fred T Cat
- TOC-TPOTS KI#: 31874
- MOULa Name: David Blue
- MOULa KI#: 13439238
- Location: Panama City, Fla.
Re: Gahreesen control room and deadly Bahro caves
It usually works the second time. try it once, go to Relto, work your way back and try again.
Life is hard
then you come back
as a cat.
then you come back
as a cat.
Re: Gahreesen control room and deadly Bahro caves

Abjab told us last night that if you go here ... DO NOT touch the wall, it will crash the server.
- FredTCat
- Posts: 60
- Joined: Sun 14. Aug 2011, 17:02
- TOC-MOUL Name: Fred T Cat
- TOC-MOUL KI#: 8468
- TOC-TPOTS Name: Fred T Cat
- TOC-TPOTS KI#: 31874
- MOULa Name: David Blue
- MOULa KI#: 13439238
- Location: Panama City, Fla.
Re: Gahreesen control room and deadly Bahro caves
I think that most of the server crashes and freezes are coincidental to our actions, not caused by them. As to the Maintainers playground, the ladder is safe to climb, but the ramps on either side are traps, if you try to climb them you will probably have to Relto out. I did crash the first time I tried to follow the walkway around, but it was personal, not system wide.
Life is hard
then you come back
as a cat.
then you come back
as a cat.
- FredTCat
- Posts: 60
- Joined: Sun 14. Aug 2011, 17:02
- TOC-MOUL Name: Fred T Cat
- TOC-MOUL KI#: 8468
- TOC-TPOTS Name: Fred T Cat
- TOC-TPOTS KI#: 31874
- MOULa Name: David Blue
- MOULa KI#: 13439238
- Location: Panama City, Fla.
Re: Gahreesen control room and deadly Bahro caves
I visited the Maintainers playground off line on my UAM/Drizzle version of the game, (the off-line Ki does jump down) and the ramps and walkways to either side of the ladder worked fine, so the problem here is probably related to the PhisX
Life is hard
then you come back
as a cat.
then you come back
as a cat.
Re: Gahreesen control room and deadly Bahro caves
I don't know how you come into this room, but it's very danerous there. The wall is broken since "Until Uru" and crash the client if you do something wrong. The whole room is a highly unstable area and I don't know what it does with the server. You should better not go there.
- Cpt-Jericho
- Posts: 114
- Joined: Mon 15. Aug 2011, 14:57
- Location: Outer Space
Re: Gahreesen control room and deadly Bahro caves
It's fairly easy to get there using the /jump KI commandOpa wrote:I don't know how you come into this room, [...]
Equal amongst other in the Guild of Sleepers
TOC Status:
TOC Status:
-
Annabelle
- Posts: 196
- Joined: Fri 5. Aug 2011, 04:17
- TOC-MOUL Name: Annabelle
- TOC-MOUL KI#: 4827
- TOC-TPOTS Name: Sophie
- TOC-TPOTS KI#: 25444
- MOULa Name: Annabelle
- MOULa KI#: 3632553
- DI Name: Annabelle
- DI KI#: 28877
- Gehn Shard Name: Annabelle-Sophie
- Gehn Shard KI#: 10268
- Minkata Name: Annabelle-Sophie
- Minkata KI#: 4247
Re: Gahreesen control room and deadly Bahro caves
I went to every bahro caves but pods ones without any problem. (The pods ones should be ok too, it is just that I didn't find time to do the Zik Journey yet)
There are just some of them like the ones for the garden ages that are quite glitchy once there but nothing harmful, I can grab the bahro wedge which is what is important in those places.
There are just some of them like the ones for the garden ages that are quite glitchy once there but nothing harmful, I can grab the bahro wedge which is what is important in those places.
Re: Gahreesen control room and deadly Bahro caves
Referring to the Garden Ages
Do we need help there as in Moul(a)?
Annabelle says they can grab the wedge
Do we need help there as in Moul(a)?
Annabelle says they can grab the wedge