The Open Cave

Trying it now

EDIT - Yes it works, if you have already collected 15 markers (ie: all the green ones) just return to the Great Zero via any hood bookroom and re-insert your KI into the terminal.
The Great Zero Courtyard link then appears on your nexus terminal.

The Great zero was there after the greens, and the doors opened after the reds (the doors are glitchy, the left one kept closing in my face!) But when I tried to run the fist mission the markers would not react, and did not have the red line. I logged out, and back in, reset the mission, and still no response, even when standing in the middle of one. The Ke and courser also did not react. HELP please
Edit; The doors on the left in G Z are timed for running, the ones on the right for walking. Also i keep getting an access violation stack when I quit after trying for the mission markers.
Edit 2; should a avatar who has not yet visited G Z be able to see the mission markers? one of mine can. off topic- the relto page from Bevin 2 seams to be missing.(must be the Bahros again)

I have to confess that I never tested the GZ marker missions before, so I can't help for now. But I should have a look at it soon.

I checked this morning, after going to the observation room to put the G Z back in Nexus, I went to the G Z and restarted the mission, then I went to Ferry to stand in a marker. upon quitting this is what I got

UruLive.1.902 - External.Release
Exception type: Access violation
Call stack (14 levels):
0x00000000
0x00000000
0x00000000
0x00000000
0x7C817077
0x0075AF46
0x006E2923
0x00696F2E
0x0069A20E
0x0069BB81
0x006D3E5B
0x006D3D54
0x006D315E
0x006D465E
good luck

Hm, after adding the Kveer Nexus terminal I can't enter any city location anymore. The Great Zero link has vanished, too...

Edit: after deleting a city link I was able to get the link to GZ back and can go to the city again.

Maybe it is fixed now, please try!

This seems to be the most relevant topic to put this observation - I recently noticed that the red/green markers keep showing up even after collecting all 30 that are needed.
That includes markers that I'm sure I collected when I initially calibrated my KI.

Got my KI. Went to GZ via hood. Sync'd KI in GZ machine. Can see markers but I cannot collect them. Target cursor will not appear. Tried many different angles on many markers.

SOLUTION: Don't click the markers--click the red marker icon in the KI display.

This is a known problem related to the new PhysX version we use (the old one is no longer available). Hoikas from the GoW tries to fix this.

Opa